Termination w.r.t. Q of the following Term Rewriting System could not be shown:

Q restricted rewrite system:
The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.


QTRS
  ↳ DependencyPairsProof

Q restricted rewrite system:
The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.

Using Dependency Pairs [1,13] we result in the following initial DP problem:
Q DP problem:
The TRS P consists of the following rules:

LEQ(mark(X1), X2) → LEQ(X1, X2)
ACTIVE(diff(X, Y)) → P(X)
P(mark(X)) → P(X)
LEQ(X1, mark(X2)) → LEQ(X1, X2)
PROPER(leq(X1, X2)) → LEQ(proper(X1), proper(X2))
ACTIVE(diff(X1, X2)) → DIFF(active(X1), X2)
S(mark(X)) → S(X)
ACTIVE(p(X)) → ACTIVE(X)
ACTIVE(leq(X1, X2)) → LEQ(active(X1), X2)
PROPER(diff(X1, X2)) → PROPER(X2)
ACTIVE(if(X1, X2, X3)) → IF(active(X1), X2, X3)
TOP(mark(X)) → TOP(proper(X))
IF(mark(X1), X2, X3) → IF(X1, X2, X3)
ACTIVE(diff(X, Y)) → LEQ(X, Y)
ACTIVE(diff(X1, X2)) → ACTIVE(X1)
ACTIVE(diff(X, Y)) → S(diff(p(X), Y))
ACTIVE(leq(s(X), s(Y))) → LEQ(X, Y)
DIFF(mark(X1), X2) → DIFF(X1, X2)
P(ok(X)) → P(X)
ACTIVE(leq(X1, X2)) → LEQ(X1, active(X2))
ACTIVE(leq(X1, X2)) → ACTIVE(X2)
TOP(ok(X)) → ACTIVE(X)
ACTIVE(s(X)) → S(active(X))
PROPER(s(X)) → PROPER(X)
ACTIVE(diff(X, Y)) → IF(leq(X, Y), 0, s(diff(p(X), Y)))
PROPER(diff(X1, X2)) → PROPER(X1)
PROPER(p(X)) → PROPER(X)
ACTIVE(diff(X1, X2)) → DIFF(X1, active(X2))
TOP(mark(X)) → PROPER(X)
PROPER(leq(X1, X2)) → PROPER(X1)
PROPER(leq(X1, X2)) → PROPER(X2)
DIFF(ok(X1), ok(X2)) → DIFF(X1, X2)
ACTIVE(diff(X1, X2)) → ACTIVE(X2)
PROPER(if(X1, X2, X3)) → PROPER(X1)
IF(ok(X1), ok(X2), ok(X3)) → IF(X1, X2, X3)
PROPER(diff(X1, X2)) → DIFF(proper(X1), proper(X2))
PROPER(if(X1, X2, X3)) → IF(proper(X1), proper(X2), proper(X3))
PROPER(p(X)) → P(proper(X))
PROPER(s(X)) → S(proper(X))
PROPER(if(X1, X2, X3)) → PROPER(X3)
ACTIVE(s(X)) → ACTIVE(X)
S(ok(X)) → S(X)
PROPER(if(X1, X2, X3)) → PROPER(X2)
DIFF(X1, mark(X2)) → DIFF(X1, X2)
ACTIVE(diff(X, Y)) → DIFF(p(X), Y)
ACTIVE(leq(X1, X2)) → ACTIVE(X1)
ACTIVE(p(X)) → P(active(X))
LEQ(ok(X1), ok(X2)) → LEQ(X1, X2)
ACTIVE(if(X1, X2, X3)) → ACTIVE(X1)
TOP(ok(X)) → TOP(active(X))

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

↳ QTRS
  ↳ DependencyPairsProof
QDP
      ↳ EdgeDeletionProof

Q DP problem:
The TRS P consists of the following rules:

LEQ(mark(X1), X2) → LEQ(X1, X2)
ACTIVE(diff(X, Y)) → P(X)
P(mark(X)) → P(X)
LEQ(X1, mark(X2)) → LEQ(X1, X2)
PROPER(leq(X1, X2)) → LEQ(proper(X1), proper(X2))
ACTIVE(diff(X1, X2)) → DIFF(active(X1), X2)
S(mark(X)) → S(X)
ACTIVE(p(X)) → ACTIVE(X)
ACTIVE(leq(X1, X2)) → LEQ(active(X1), X2)
PROPER(diff(X1, X2)) → PROPER(X2)
ACTIVE(if(X1, X2, X3)) → IF(active(X1), X2, X3)
TOP(mark(X)) → TOP(proper(X))
IF(mark(X1), X2, X3) → IF(X1, X2, X3)
ACTIVE(diff(X, Y)) → LEQ(X, Y)
ACTIVE(diff(X1, X2)) → ACTIVE(X1)
ACTIVE(diff(X, Y)) → S(diff(p(X), Y))
ACTIVE(leq(s(X), s(Y))) → LEQ(X, Y)
DIFF(mark(X1), X2) → DIFF(X1, X2)
P(ok(X)) → P(X)
ACTIVE(leq(X1, X2)) → LEQ(X1, active(X2))
ACTIVE(leq(X1, X2)) → ACTIVE(X2)
TOP(ok(X)) → ACTIVE(X)
ACTIVE(s(X)) → S(active(X))
PROPER(s(X)) → PROPER(X)
ACTIVE(diff(X, Y)) → IF(leq(X, Y), 0, s(diff(p(X), Y)))
PROPER(diff(X1, X2)) → PROPER(X1)
PROPER(p(X)) → PROPER(X)
ACTIVE(diff(X1, X2)) → DIFF(X1, active(X2))
TOP(mark(X)) → PROPER(X)
PROPER(leq(X1, X2)) → PROPER(X1)
PROPER(leq(X1, X2)) → PROPER(X2)
DIFF(ok(X1), ok(X2)) → DIFF(X1, X2)
ACTIVE(diff(X1, X2)) → ACTIVE(X2)
PROPER(if(X1, X2, X3)) → PROPER(X1)
IF(ok(X1), ok(X2), ok(X3)) → IF(X1, X2, X3)
PROPER(diff(X1, X2)) → DIFF(proper(X1), proper(X2))
PROPER(if(X1, X2, X3)) → IF(proper(X1), proper(X2), proper(X3))
PROPER(p(X)) → P(proper(X))
PROPER(s(X)) → S(proper(X))
PROPER(if(X1, X2, X3)) → PROPER(X3)
ACTIVE(s(X)) → ACTIVE(X)
S(ok(X)) → S(X)
PROPER(if(X1, X2, X3)) → PROPER(X2)
DIFF(X1, mark(X2)) → DIFF(X1, X2)
ACTIVE(diff(X, Y)) → DIFF(p(X), Y)
ACTIVE(leq(X1, X2)) → ACTIVE(X1)
ACTIVE(p(X)) → P(active(X))
LEQ(ok(X1), ok(X2)) → LEQ(X1, X2)
ACTIVE(if(X1, X2, X3)) → ACTIVE(X1)
TOP(ok(X)) → TOP(active(X))

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We deleted some edges using various graph approximations

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
QDP
          ↳ DependencyGraphProof

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(diff(X, Y)) → P(X)
LEQ(mark(X1), X2) → LEQ(X1, X2)
P(mark(X)) → P(X)
PROPER(leq(X1, X2)) → LEQ(proper(X1), proper(X2))
LEQ(X1, mark(X2)) → LEQ(X1, X2)
ACTIVE(diff(X1, X2)) → DIFF(active(X1), X2)
S(mark(X)) → S(X)
ACTIVE(p(X)) → ACTIVE(X)
PROPER(diff(X1, X2)) → PROPER(X2)
ACTIVE(leq(X1, X2)) → LEQ(active(X1), X2)
ACTIVE(if(X1, X2, X3)) → IF(active(X1), X2, X3)
TOP(mark(X)) → TOP(proper(X))
ACTIVE(diff(X, Y)) → LEQ(X, Y)
IF(mark(X1), X2, X3) → IF(X1, X2, X3)
ACTIVE(diff(X1, X2)) → ACTIVE(X1)
ACTIVE(diff(X, Y)) → S(diff(p(X), Y))
DIFF(mark(X1), X2) → DIFF(X1, X2)
ACTIVE(leq(s(X), s(Y))) → LEQ(X, Y)
P(ok(X)) → P(X)
ACTIVE(leq(X1, X2)) → LEQ(X1, active(X2))
ACTIVE(leq(X1, X2)) → ACTIVE(X2)
TOP(ok(X)) → ACTIVE(X)
ACTIVE(s(X)) → S(active(X))
PROPER(s(X)) → PROPER(X)
ACTIVE(diff(X, Y)) → IF(leq(X, Y), 0, s(diff(p(X), Y)))
PROPER(diff(X1, X2)) → PROPER(X1)
PROPER(p(X)) → PROPER(X)
ACTIVE(diff(X1, X2)) → DIFF(X1, active(X2))
TOP(mark(X)) → PROPER(X)
PROPER(leq(X1, X2)) → PROPER(X1)
DIFF(ok(X1), ok(X2)) → DIFF(X1, X2)
PROPER(leq(X1, X2)) → PROPER(X2)
ACTIVE(diff(X1, X2)) → ACTIVE(X2)
PROPER(if(X1, X2, X3)) → PROPER(X1)
IF(ok(X1), ok(X2), ok(X3)) → IF(X1, X2, X3)
PROPER(diff(X1, X2)) → DIFF(proper(X1), proper(X2))
PROPER(if(X1, X2, X3)) → IF(proper(X1), proper(X2), proper(X3))
PROPER(if(X1, X2, X3)) → PROPER(X3)
PROPER(s(X)) → S(proper(X))
PROPER(p(X)) → P(proper(X))
S(ok(X)) → S(X)
ACTIVE(s(X)) → ACTIVE(X)
PROPER(if(X1, X2, X3)) → PROPER(X2)
DIFF(X1, mark(X2)) → DIFF(X1, X2)
ACTIVE(diff(X, Y)) → DIFF(p(X), Y)
ACTIVE(leq(X1, X2)) → ACTIVE(X1)
ACTIVE(p(X)) → P(active(X))
LEQ(ok(X1), ok(X2)) → LEQ(X1, X2)
TOP(ok(X)) → TOP(active(X))
ACTIVE(if(X1, X2, X3)) → ACTIVE(X1)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The approximation of the Dependency Graph [13,14,18] contains 8 SCCs with 20 less nodes.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
QDP
                ↳ QDPOrderProof
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

DIFF(X1, mark(X2)) → DIFF(X1, X2)
DIFF(ok(X1), ok(X2)) → DIFF(X1, X2)
DIFF(mark(X1), X2) → DIFF(X1, X2)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


DIFF(ok(X1), ok(X2)) → DIFF(X1, X2)
The remaining pairs can at least be oriented weakly.

DIFF(X1, mark(X2)) → DIFF(X1, X2)
DIFF(mark(X1), X2) → DIFF(X1, X2)
Used ordering: Combined order from the following AFS and order.
DIFF(x1, x2)  =  x2
mark(x1)  =  x1
ok(x1)  =  ok(x1)

Recursive path order with status [2].
Quasi-Precedence:
trivial

Status:
trivial


The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
                ↳ QDPOrderProof
QDP
                    ↳ QDPOrderProof
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

DIFF(X1, mark(X2)) → DIFF(X1, X2)
DIFF(mark(X1), X2) → DIFF(X1, X2)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


DIFF(X1, mark(X2)) → DIFF(X1, X2)
The remaining pairs can at least be oriented weakly.

DIFF(mark(X1), X2) → DIFF(X1, X2)
Used ordering: Combined order from the following AFS and order.
DIFF(x1, x2)  =  x2
mark(x1)  =  mark(x1)

Recursive path order with status [2].
Quasi-Precedence:
trivial

Status:
trivial


The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
QDP
                        ↳ QDPOrderProof
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

DIFF(mark(X1), X2) → DIFF(X1, X2)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


DIFF(mark(X1), X2) → DIFF(X1, X2)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Combined order from the following AFS and order.
DIFF(x1, x2)  =  x1
mark(x1)  =  mark(x1)

Recursive path order with status [2].
Quasi-Precedence:
trivial

Status:
trivial


The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof
QDP
                            ↳ PisEmptyProof
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
QDP
                ↳ QDPOrderProof
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

IF(mark(X1), X2, X3) → IF(X1, X2, X3)
IF(ok(X1), ok(X2), ok(X3)) → IF(X1, X2, X3)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


IF(ok(X1), ok(X2), ok(X3)) → IF(X1, X2, X3)
The remaining pairs can at least be oriented weakly.

IF(mark(X1), X2, X3) → IF(X1, X2, X3)
Used ordering: Combined order from the following AFS and order.
IF(x1, x2, x3)  =  x3
ok(x1)  =  ok(x1)

Recursive path order with status [2].
Quasi-Precedence:
trivial

Status:
trivial


The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
              ↳ QDP
                ↳ QDPOrderProof
QDP
                    ↳ QDPOrderProof
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

IF(mark(X1), X2, X3) → IF(X1, X2, X3)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


IF(mark(X1), X2, X3) → IF(X1, X2, X3)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Combined order from the following AFS and order.
IF(x1, x2, x3)  =  x1
mark(x1)  =  mark(x1)

Recursive path order with status [2].
Quasi-Precedence:
trivial

Status:
trivial


The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
QDP
                        ↳ PisEmptyProof
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
              ↳ QDP
QDP
                ↳ QDPOrderProof
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

LEQ(ok(X1), ok(X2)) → LEQ(X1, X2)
LEQ(mark(X1), X2) → LEQ(X1, X2)
LEQ(X1, mark(X2)) → LEQ(X1, X2)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


LEQ(X1, mark(X2)) → LEQ(X1, X2)
The remaining pairs can at least be oriented weakly.

LEQ(ok(X1), ok(X2)) → LEQ(X1, X2)
LEQ(mark(X1), X2) → LEQ(X1, X2)
Used ordering: Combined order from the following AFS and order.
LEQ(x1, x2)  =  x2
ok(x1)  =  x1
mark(x1)  =  mark(x1)

Recursive path order with status [2].
Quasi-Precedence:
trivial

Status:
trivial


The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
              ↳ QDP
              ↳ QDP
                ↳ QDPOrderProof
QDP
                    ↳ QDPOrderProof
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

LEQ(ok(X1), ok(X2)) → LEQ(X1, X2)
LEQ(mark(X1), X2) → LEQ(X1, X2)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


LEQ(ok(X1), ok(X2)) → LEQ(X1, X2)
The remaining pairs can at least be oriented weakly.

LEQ(mark(X1), X2) → LEQ(X1, X2)
Used ordering: Combined order from the following AFS and order.
LEQ(x1, x2)  =  x2
ok(x1)  =  ok(x1)

Recursive path order with status [2].
Quasi-Precedence:
trivial

Status:
trivial


The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
              ↳ QDP
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
QDP
                        ↳ QDPOrderProof
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

LEQ(mark(X1), X2) → LEQ(X1, X2)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


LEQ(mark(X1), X2) → LEQ(X1, X2)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Combined order from the following AFS and order.
LEQ(x1, x2)  =  x1
mark(x1)  =  mark(x1)

Recursive path order with status [2].
Quasi-Precedence:
trivial

Status:
trivial


The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
              ↳ QDP
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof
QDP
                            ↳ PisEmptyProof
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
              ↳ QDP
              ↳ QDP
QDP
                ↳ QDPOrderProof
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

S(ok(X)) → S(X)
S(mark(X)) → S(X)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


S(mark(X)) → S(X)
The remaining pairs can at least be oriented weakly.

S(ok(X)) → S(X)
Used ordering: Combined order from the following AFS and order.
S(x1)  =  x1
ok(x1)  =  x1
mark(x1)  =  mark(x1)

Recursive path order with status [2].
Quasi-Precedence:
trivial

Status:
trivial


The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
                ↳ QDPOrderProof
QDP
                    ↳ QDPOrderProof
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

S(ok(X)) → S(X)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


S(ok(X)) → S(X)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Combined order from the following AFS and order.
S(x1)  =  x1
ok(x1)  =  ok(x1)

Recursive path order with status [2].
Quasi-Precedence:
trivial

Status:
trivial


The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
QDP
                        ↳ PisEmptyProof
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
QDP
                ↳ QDPOrderProof
              ↳ QDP
              ↳ QDP
              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

P(mark(X)) → P(X)
P(ok(X)) → P(X)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


P(ok(X)) → P(X)
The remaining pairs can at least be oriented weakly.

P(mark(X)) → P(X)
Used ordering: Combined order from the following AFS and order.
P(x1)  =  x1
mark(x1)  =  x1
ok(x1)  =  ok(x1)

Recursive path order with status [2].
Quasi-Precedence:
trivial

Status:
trivial


The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
                ↳ QDPOrderProof
QDP
                    ↳ QDPOrderProof
              ↳ QDP
              ↳ QDP
              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

P(mark(X)) → P(X)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


P(mark(X)) → P(X)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Combined order from the following AFS and order.
P(x1)  =  x1
mark(x1)  =  mark(x1)

Recursive path order with status [2].
Quasi-Precedence:
trivial

Status:
trivial


The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
QDP
                        ↳ PisEmptyProof
              ↳ QDP
              ↳ QDP
              ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
QDP
                ↳ QDPOrderProof
              ↳ QDP
              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

PROPER(diff(X1, X2)) → PROPER(X2)
PROPER(leq(X1, X2)) → PROPER(X1)
PROPER(s(X)) → PROPER(X)
PROPER(leq(X1, X2)) → PROPER(X2)
PROPER(if(X1, X2, X3)) → PROPER(X3)
PROPER(if(X1, X2, X3)) → PROPER(X1)
PROPER(diff(X1, X2)) → PROPER(X1)
PROPER(if(X1, X2, X3)) → PROPER(X2)
PROPER(p(X)) → PROPER(X)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


PROPER(diff(X1, X2)) → PROPER(X2)
PROPER(leq(X1, X2)) → PROPER(X1)
PROPER(leq(X1, X2)) → PROPER(X2)
PROPER(if(X1, X2, X3)) → PROPER(X3)
PROPER(if(X1, X2, X3)) → PROPER(X1)
PROPER(diff(X1, X2)) → PROPER(X1)
PROPER(if(X1, X2, X3)) → PROPER(X2)
The remaining pairs can at least be oriented weakly.

PROPER(s(X)) → PROPER(X)
PROPER(p(X)) → PROPER(X)
Used ordering: Combined order from the following AFS and order.
PROPER(x1)  =  x1
diff(x1, x2)  =  diff(x1, x2)
leq(x1, x2)  =  leq(x1, x2)
s(x1)  =  x1
if(x1, x2, x3)  =  if(x1, x2, x3)
p(x1)  =  x1

Recursive path order with status [2].
Quasi-Precedence:
trivial

Status:
trivial


The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
                ↳ QDPOrderProof
QDP
                    ↳ QDPOrderProof
              ↳ QDP
              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

PROPER(s(X)) → PROPER(X)
PROPER(p(X)) → PROPER(X)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


PROPER(p(X)) → PROPER(X)
The remaining pairs can at least be oriented weakly.

PROPER(s(X)) → PROPER(X)
Used ordering: Combined order from the following AFS and order.
PROPER(x1)  =  x1
s(x1)  =  x1
p(x1)  =  p(x1)

Recursive path order with status [2].
Quasi-Precedence:
trivial

Status:
trivial


The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
QDP
                        ↳ QDPOrderProof
              ↳ QDP
              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

PROPER(s(X)) → PROPER(X)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


PROPER(s(X)) → PROPER(X)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Combined order from the following AFS and order.
PROPER(x1)  =  x1
s(x1)  =  s(x1)

Recursive path order with status [2].
Quasi-Precedence:
trivial

Status:
trivial


The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof
QDP
                            ↳ PisEmptyProof
              ↳ QDP
              ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
QDP
                ↳ QDPOrderProof
              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(diff(X1, X2)) → ACTIVE(X1)
ACTIVE(if(X1, X2, X3)) → ACTIVE(X1)
ACTIVE(diff(X1, X2)) → ACTIVE(X2)
ACTIVE(leq(X1, X2)) → ACTIVE(X1)
ACTIVE(s(X)) → ACTIVE(X)
ACTIVE(leq(X1, X2)) → ACTIVE(X2)
ACTIVE(p(X)) → ACTIVE(X)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


ACTIVE(diff(X1, X2)) → ACTIVE(X1)
ACTIVE(diff(X1, X2)) → ACTIVE(X2)
ACTIVE(leq(X1, X2)) → ACTIVE(X1)
ACTIVE(leq(X1, X2)) → ACTIVE(X2)
The remaining pairs can at least be oriented weakly.

ACTIVE(if(X1, X2, X3)) → ACTIVE(X1)
ACTIVE(s(X)) → ACTIVE(X)
ACTIVE(p(X)) → ACTIVE(X)
Used ordering: Combined order from the following AFS and order.
ACTIVE(x1)  =  x1
diff(x1, x2)  =  diff(x1, x2)
if(x1, x2, x3)  =  x1
leq(x1, x2)  =  leq(x1, x2)
s(x1)  =  x1
p(x1)  =  x1

Recursive path order with status [2].
Quasi-Precedence:
trivial

Status:
trivial


The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
                ↳ QDPOrderProof
QDP
                    ↳ QDPOrderProof
              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(if(X1, X2, X3)) → ACTIVE(X1)
ACTIVE(s(X)) → ACTIVE(X)
ACTIVE(p(X)) → ACTIVE(X)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


ACTIVE(p(X)) → ACTIVE(X)
The remaining pairs can at least be oriented weakly.

ACTIVE(if(X1, X2, X3)) → ACTIVE(X1)
ACTIVE(s(X)) → ACTIVE(X)
Used ordering: Combined order from the following AFS and order.
ACTIVE(x1)  =  x1
if(x1, x2, x3)  =  x1
s(x1)  =  x1
p(x1)  =  p(x1)

Recursive path order with status [2].
Quasi-Precedence:
trivial

Status:
trivial


The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
QDP
                        ↳ QDPOrderProof
              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(if(X1, X2, X3)) → ACTIVE(X1)
ACTIVE(s(X)) → ACTIVE(X)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


ACTIVE(s(X)) → ACTIVE(X)
The remaining pairs can at least be oriented weakly.

ACTIVE(if(X1, X2, X3)) → ACTIVE(X1)
Used ordering: Combined order from the following AFS and order.
ACTIVE(x1)  =  x1
if(x1, x2, x3)  =  x1
s(x1)  =  s(x1)

Recursive path order with status [2].
Quasi-Precedence:
trivial

Status:
trivial


The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof
QDP
                            ↳ QDPOrderProof
              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(if(X1, X2, X3)) → ACTIVE(X1)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].


The following pairs can be oriented strictly and are deleted.


ACTIVE(if(X1, X2, X3)) → ACTIVE(X1)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Combined order from the following AFS and order.
ACTIVE(x1)  =  x1
if(x1, x2, x3)  =  if(x1)

Recursive path order with status [2].
Quasi-Precedence:
trivial

Status:
trivial


The following usable rules [14] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof
                          ↳ QDP
                            ↳ QDPOrderProof
QDP
                                ↳ PisEmptyProof
              ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ EdgeDeletionProof
        ↳ QDP
          ↳ DependencyGraphProof
            ↳ AND
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
              ↳ QDP
QDP

Q DP problem:
The TRS P consists of the following rules:

TOP(ok(X)) → TOP(active(X))
TOP(mark(X)) → TOP(proper(X))

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.